Saturday, February 9, 2013

I'm writing a book about my life ? Julius Agwu

By OPEOLUWANI OGUNJIMI

With arms confidently placed on his desk, right inside his Surulere office, popular Comedian, Julius Agwu, who is one of the most successful comic acts in the country, recounts his life, forty years down the line.

He also spoke about his plan to celebrate his fortieth birthday, his book, new single, new TV show and family.

Excerpts:

This is a new year, what have you been up to?

This is a new year, 2013. For me, it?s two thousand and re-starting because this year, I?m going to be forty and it?s a new start for me. I was talking with the Deputy Governor of Cross River State and he said; forty is the old age of youth and it?s also the youth of old age.

We got talking about my fortieth and he was advising me and told me it?s worth celebrating. I was also speaking with Alex Oti, the Group Director of? Diamond Bank and he said; all the foolish things I do should end in March before my fortieth in April, because a fool at forty is a fool forever. This year also, I?m writing a book? about my journey so far.

What?s the title of the book?

I don?t want to reveal the title for now for fear of? Nollywood so they won?t name a movie after it.? But we are working on it and it?s being? edited by Tony Kan. The whole idea of it is that this is a fresh beginning for me and I call it 20-restarting, a year I want to re- strategize and re-position. As a matter of fact, I?m doing a song now and it?s titled Rejuvenate. So I want to rejuvenate the brand and myself.

So what are those things you used to do that you are going to stop doing @ 40?

Although I know them, I don?t want to reveal them because they are personal things.

Are you planning to celebrate your fortieth?

Of course I plan celebrating it. I want to use that medium to appreciate those who have helped me this far- my friends, brothers and sisters and everybody, especially God. It?s not? that I?m rich but I?m wealthy. I have a wealth of experience.

Julius Agwu and wife

Julius Agwu and wife

So what are those things lined up for that day?

I already mentioned that my book will be launched, which is the major thing. And there will be other performances by friends and colleagues.

I?m sure you plan celebrating it big. So are there any persons or corporate groups supporting you?

Nobody is supporting me yet with anything and it?s strictly by invitation.

So why did you decide to write a book?

Like I said, it?s about my journey so far, where I?m coming from, challenges and obstacles and the wheel of progress; where I am today. Like it or not, we are not Lagosians. There are people who come to Lagos with nylon bags and go back with briefcases, and others come with briefcases and go back with nylon bags.

But God has been very very nice to me. My career is such that they say entertainers? life span is never long but the grace of God has brought me this far and I feel there?s a cause for celebration. I also want to celebrate my fans. Co incidentally, my fortieth falls on a Sunday. So part of it is that we?ll go to church in the morning, and then in the evening, we celebrate.

Aside that, I?ll also be launching my new TV show titled Jokes Apart.

For how long has it been in the pipeline?

For five years now. And that?s because TV production isn?t easy, so we have to put in our best. Aside from that, it?s something we want to concentrate on so we don?t get distracted by other things.

What are the side attraction that Jokes Apart will bring to viewers?

Let them just look out for the show when it starts and later, they can now judge our performances. We know we may make our mistakes but we hope to get it right from the start. For it to have been in the pipeline for five years, reason is the fear of failure? and this is my greatest fear. So I believe God to give me wisdom to make it a success.

So have you finished shooting?

We haven?t but we?ve already set up a studio. So, we?re waiting for the technical crew before we start shooting. It will unveil in April.

Are you going to have a live audience like Teju Babyface?

No, there won?t be a live audience. It?s studio based.

Do you have sponsors yet?

That?s one of the major challenges we have. At the moment, there?s no sponsor yet. But then we thank God that some of us have been able to sustain our brands.

What about the Abuja Festival Of Love?

Yes, it?s something I started two years ago in Abuja. Over the year, I?ve always spent Valentine and my birthdays with the less privilege because I see it as my own corporate social responsibility. So last two years, 2011, I decided that I wanted to start something about showing love to people who lack love.

That was why I started it but it was when the bombing issue was the order of the day in Abuja. So we did the? first edition in Abuja, the second was held in Lagos because of the unrest in Abuja. We actually got threats not to hold the event there and then, the Abuja people were too scared to gather.

So this year, I don?t want to hold it in Lagos because there are so many events already holding here, that?s why we are taking it back to Abuja. So for all our events, Aero Contractors has been very supportive, they are our official carrier, even on this event. So it?s a classic event for lovers. There will be couple?s games, karaoke games and part of the proceeds will be given back to charity.

Why is it that your shows don?t always have sponsors?

Okay, for this particular one, Festival of Love, it?s powered by OsmoServe Global, owned by a friend of mine called Scot Tommy, he just promised to do so but he hasn?t given anything yet but I?m hoping he?ll sponsor it. I?m also saying thank you to my colleagues who have decided to be part of it. I can?t pay them what they are worth but then, I pay them. As a matter of fact, I started paying a token of appreciation to my colleagues right from when we started Crack Ya Ribs as far back of 2001.

For music, we have Wizkid, Bunner Boy and Chidnma. For comedy, we have Bovi, Apororo, Daniel, based in Port-Harcourt, Chugo, and others. There?s going to be? a red carpet by 5pm and then cocktail.

Being into entertainment isn?t all about money but passion, and that?s why I don?t mind funding my shows alone. My joy is that what I do give me satisfaction.

Aside organizing your own shows, do you still accept invites to perform on other colleagues? shows?

Yes I do. I also encourage other up-comers to participate.

Like? who and who are the up-comers you are supporting at the moment?

There are quite many. We have Daniel ?D? Humorous based in Port-Harcourt, Senator based in Jos, Fony Bone, Osama, all these people I?ve taken to London and America; they?ve been around the world courtesy of the platform I provide.

So how does it? feel to be 40 because you don?t look it?

Like I said, I was dancing Azonto and my wife said I shouldn?t be dancing to such at my age. So I told her that even at 80, I?ll still be dancing to songs in vogue. Age is a function of the mind.

Comments are moderated. Please keep them clean and brief.

Source: http://www.vanguardngr.com/2013/02/im-writing-a-book-about-my-life-julius-agwu/

the monkees ciaa love actually strikeforce davy jones deep impact miesha tate vs ronda rousey

8 Romantic Gifts for Space Lovers

Feb 8 (Reuters) - FedExCup champion Brandt Snedeker, the hottest player on the PGA Tour this year, took advantage of ideal scoring conditions by charging into a share of the second-round lead at the Pebble Beach National Pro-Am on Friday. The fast-talking American fired a flawless four-under-par 68 on a glorious sun-splashed afternoon at Spyglass Hill, one of three venues being used for this week's pro-am celebrity event, to post an eight-under total of 134. ...

Source: http://news.yahoo.com/8-romantic-gifts-space-lovers-194927568.html

wimbledon ray allen Savages Home Run Derby 2012 San Diego fireworks steve nash july 4th

New name - same quality! - Shadows Custom Woodworking

When I am not doing custom pieces I am usually working for other contractors, installing cabinets and trim. I post my custom work here.

New name - same quality!

For a few years now, I've wanted to bring the family name back into my business. ?My dad and uncle were in business for many years as master carpenters, and used the family name for the business, and I wanted to get back to those roots. I found the solution in obtaining a DBA (doing business as) name from the State of Ohio. ?And, because I have my sons help me from time to time, it really has become a family business. ?Therefore, we'll now be recognized as Eisenmann Family Woodworking! ?Nothing's changed except the name, and we're looking forward to helping you with your next project. ?Give me a call today!

Source: http://reisenmann.blogspot.com/2013/02/new-name-same-quality.html

boxing news Coptic Christian saturday night live julio cesar chavez jr Topless Kate university of texas UT Austin

Friday, February 8, 2013

How to Recover Data When Your Hard Drive Goes Belly Up

How to Recover Data When Your Hard Drive Goes Belly UpImagine this: you're busy working on your computer and need to access documents saved on your external hard drive. You connect it, get ready to find your data, and...nothing happens. Your hard drive isn't working. Uh oh. Before you panic, there are several things you can try on your own before calling in the pros.

Data loss can be due to a number of factors, but two are the most common. The first (and easiest to resolve) is software related. You've accidentally deleted an important folder and emptied the recycle bin, or gone and formatted the wrong drive by mistake. The second?and probably most common?cause of data loss is a fault with the hard drive itself. Given the complexity of modern drives it's no wonder that somewhere along the line something will go wrong. When the drive suffers from some form of failure there's often little that you can do yourself to get the data back?professional data recovery services are usually required. However, there are certain failures that you can attempt to resolve yourself.

Recover Your Data with Software

When dealing with a software data loss, the first and most important thing to keep in mind is not to work with the drive in question. Every second that the drive is connected to a running system is a second that you lose your chances at recovery. Your operating system is reading and writing to your drive constantly, whether you're actively doing something or not. Now that your system is seeing the deleted data as ?free space' it will happily overwrite this area?along with your chances of recovery.

  1. Shutdown the machine connected to the drive you've deleted data from. Now that your drive is ?safe' you can make a clone of the drive and attempt the recovery from the clone. There are a number of ways to clone the drive, some easier and quicker than others.
  2. Scan the clone with a few different recovery programs. There are numerous options here, both free and paid-for packages are available. Recuva is a good free option, while Zero Assumption Recovery works well if you want to splash out a few dollars.

How to Recover Data When Your Hard Drive Goes Belly Up

Pictured: The basic components of a hard drive with top cover off and PCB removed.

Recover Your Data with Hardware

Having covered the ?deleted data' section of data recovery is all good and well, but what happens if your drive is not even being detected by your machine? Or your machine can see the drive, but just hangs when you try to access it? What about if the drive is completely dead and won't even spin up? Let's briefly cover the main components of a drive, see which components can fail, and what symptoms each failure might exhibit.

PCB: This is the (often green) circuit board attached to the bottom of your drive. It houses the main controller (the equivalent of your computer's CPU) along with many other electronic controllers. This is the interface that turns your 0s and 1s from the platter into usable data that your computer can understand.

Platters: Your drive contains one or more thin, circular platters. These spin around at anywhere between 5,900rpm to 7,200rpm on consumer drives and are the media that actually store your data. Made of glass or some form of alloy and coated with a magnetic layer, they can store anything up to 4TB of data.

Head assembly: Data from your drives' platters is read by means of a series of read and write heads. While in operation, these heads are not actually in contact with the surface of the platters. In fact, they ?fly' nanometers above the surface of the disk, reading and writing data. Typically a drive will have 2 heads per platter, so a large capacity drive with 3 platters will be paired up with 6 heads, one for each side of each platter. If these heads fail physically or the drive is dropped or knocked over, the drive can experience a ?head crash' where the heads no longer fly over the platters, but instead make contact with the surface and destroy your data at a few thousand revolutions per minute.

Firmware: Your drive runs its own mini operating system in order to deal with all of the data and operations required to access it. Most of this firmware is stored on the platters. A small portion is stored on the PCB, which is required when the drive starts up. Firmware can go wrong, leading to inaccessibility of your data. Unfortunately hard drive firmware is not similar to your mobile phone or tablet?you cannot just update or reflash it. Each drive has its own unique modules and parameters and is highly complex in nature.

Now that we understand the basic components of a hard drive let's look at some common failures and symptoms you might experience, determine which component could be causing the problem, and see if we can tackle some of these problems DIY style.

If Your Drive Isn't Spinning Up At All

This is the one instance where you have a relatively good chance of resurrecting your drive if you're prepared to put in some time and effort. If the drive does absolutely nothing when you apply power to it (no noises at all), it is 99% a PCB problem. With older drives, you could sometimes find a matching PCB from another matching drive, swap it over, and voila. However, on new drives, technology and architecture have changed and each drive contains microcode unique to the drive it's attached to. Simply swapping the PCB with a matching, working equivalent has almost no chance of working and can be outright dangerous to your data.

There are two main causes of failure here, either a TVS diode (fuse) has shorted due to overvoltage, or a vital component on the PCB has failed. Hard drive PCBs often have two TVS diodes which act as fuses to protect your drive in the event of a power spike. There will most likely be two of these: one for the 5v and one for the 12v rail. If you accidentally plugged in the wrong power adapter to your external drive, or you experienced a power surge, a TVS diode might have sacrificed itself. If the shorted TVS diode is the only casualty and the rest of the PCB components are OK, then simply removing the shorted diode is enough to bring the drive back to life.

You can test this with a multimeter?if the diode reads zero ohms, or close to it, then it has indeed shortened. When shorted these diodes often have a noticeable burnt smell and might have visible burn damage. Note that when a TVS diode is removed the drive is no longer protected, so ensure that the power supply you connect to the drive is correct and healthy.

How to Recover Data When Your Hard Drive Goes Belly Up

Pictured: A PCB with the TVS diodes highlighted

If the TVS diodes don't smell burnt and show the correct digits when measuring them, then the problem is the PCB itself. A replacement PCB is required, but not just a straight swap. There is an 8 pin ROM chip on most PCBs that contains unique firmware info that is required to start up the drive. This needs to be moved from the old PCB to the new in order for the replacement to work. Some hard drives, especially Western Digitals, do not have this 8 pin chip?the firmware is stored in the main controller which is virtually impossible to move.

If you want to replace the PCB then you'll need to fine a matching replacement and have the ROM chip moved. There are many online providers that will sell you a matching PCB. Some of them even offer to move the ROM chip for you, saving you the hassle of soldering and possibly damaging the chip. If the PCB was the only damaged component and the drive's internals are OK, then after the replacement and ROM swap, your drive should be up and running again. Another PCB-related item to check are the head contacts. Sometimes they corrode with time, but are easily cleaned with a rubber eraser.

How to Recover Data When Your Hard Drive Goes Belly Up

Pictured: The contacts on a PCB can cause problems when they become tarnished like this.

If Your Drive Is Spinning Up and Making Clicking Noises

This is a serious failure and indicates a failed head or heads. It could also mean that your drive has suffered from platter damage if a head crash has occurred. Either way, this is a job for the pros. The drive will need to be opened in a clean room environment in a lab and a replacement head assembly fitted in order to try and recover your data. If your drive is clicking, it's best power it off and leave it in this state until you can send it to a professional recovery company. Powering it up in this state could degrade the disk further, to the extent that it's no longer recoverable.

How to Recover Data When Your Hard Drive Goes Belly Up

Pictured: A hard drive that experienced a head crash and made a deep scratch. This can render a drive unrecoverable.

If Your Drives Spins Ups and Is Detected by Your Computer, But Hangs When You Try to Access It

This usually means that the magnetic media is degraded. Basically, there are a large amount of bad sectors that the drive is trying to read, failing to do so, and hanging. This is a common problem that occurs over time and can be worked around, but only with professional data recovery equipment, more specifically a hard imager. If you look at the SMART values of the drive you'll notice and large amount of reallocated sectors to confirm your suspicions. If the data is important then send it off to the pros.

If you want to have a crack at it yourself (and risk making the problem worse or losing your data altogether) then you can try a software imager that can work around bad areas. Seeing that software commands ultimately goes through the BIOS, the effectiveness is limited. The best option if you want to go this route is a free Linux application called dd_rescue. It can skip bad areas and image in reverse.

If Your Drive Makes a Beeping Sound When You Power it Up

The beeping sounds you are hearing is the motor trying to spin the drive up and failing to do so. This is caused by one of two things, both serious mechanical failures. The most common is what's known as stiction. The heads of your drive park either in the center or on a ramp at the edge of the drive when not in use. Remember, the heads don't make contact with the data area of the platters, they fly just above. Sometimes, the heads can fail to park properly and the platters stop spinning with the heads still over the data area. Because of the extremely smooth surfaces of both the platters and heads, they literally stick to each other, hence the name stiction. The drive needs to be opened up in the lab, heads carefully removed and most likely replaced, definitely not a DIY job.

How to Recover Data When Your Hard Drive Goes Belly Up

Pictured: The head assembly with drive turned off and heads in the parked position. With stiction, they would be stuck somewhere on the platters.

The other cause could be seizure of the motor spindle. This is the spindle around which the platters rotate. It can become seized if the drive suffers a hard knock or drop. It's not a particularly common fault, except for Seagate drives as they have a particularly fragile spindle. There are two ways for this problem to be resolved, both of which require pro intervention. Either the spindle can be replaced or the platters are moved to a new hard drive casing along with heads, PCB, the works.

If Your Drive Sounds Normal but is Not Detected, or is Detected as the Wrong Capacity

This normally indicates a problem with some area of the firmware. Either it's not being read properly which could actually be head problem, or there is some corruption that needs to be resolved. A few years back there was a well-known bug with Seagate 7200.11 drives with firmware version SD15 known was the BSY bug. Googling this provide a wealth of info of the huge amount of failures were caused by this firmware glitch. There was a DIY solution for this particular problem, but with today's drives there is nothing that the end user can do but to send your drive in for professional help.

So, there are a few instances where you can attempt to recover your own data. If you've accidentally deleted your data then you might be in luck. If the drive is completely dead and won't even power up then you could go the DIY PCB route if you wish to tinker. Other than that, if your drive is making unusual noises or acting in a peculiar manner, you'll need to hand it over?together with some hard earned cash?to a data recovery professional. Remember, ANY attempts at data recovery are risky. If the data is important, take it directly to the professionals.


Nick Parsons is the Founder of SouthBit Data Recovery, leading data recovery service provider in South Africa. He founded SouthBit after receiving his honors degree in digital forensics. SouthBit Data Recovery rovides recovery services to all media including hard drives, SSD drives, and RAIDs. People can get more info on how their hard drive works by viewing their site at here.

Want to see your work on Lifehacker? Email Tessa.

Source: http://feeds.gawker.com/~r/lifehacker/full/~3/nbiqZKlmKPI/diy-data-recovery-tricks-for-when-your-hard-drive-goes-belly-up

walking dead where do i vote dixville notch Remember Remember The 5th Of November African painted dogs What Time Do Polls Open Krysten Ritter

Thursday, February 7, 2013

Amazon announces Coins, a virtual currency coming to the Kindle Fire in May

DNP Amazon Kindle Fire HD review 89inch, 4G LTE

Jeff Bezos, whose fortune is probably built upon real money, has decided to invent a fake one for his customers. Amazon is launching a virtual currency, called Amazon Coins, which is designed to encourage Kindle Fire users to buy apps, games and in-app item purchases. When it launches in May, Amazon plans to give away tens of millions of dollars worth of free coins to consumers, just to get 'em hooked -- before pulling the old switcheroo and demanding they stump up their hard-earned in order to be able to buy things from Farmville.

Filed under: ,

Comments

Source: Amazon

Source: http://feeds.engadget.com/~r/weblogsinc/engadget/~3/FRr61whsJc8/

separation of church and state dale earnhardt oscar predictions nba all star game 2012 academy awards 2012 nominations academy awards independent spirit awards 2012

Wednesday, February 6, 2013

Monopoly fans vote to toss 1 token, add new piece

PAWTUCKET, R.I. (AP) ? The end is near for the shoe, wheelbarrow or iron in the classic Monopoly game as fans vote Tuesday in the final hours of a contest to determine which token to eliminate and which piece to replace it with.

The eight tokens identify the players and have changed quite a lot since Parker Brothers bought the game from its original designer in 1935. The latest changes mark the first time that fans have had a say on which piece to add and which one to toss.

The voting on Facebook is scheduled to close just before midnight Tuesday. Pawtucket-based toy maker Hasbro Inc. will announce the new piece Wednesday morning.

So far, the wheelbarrow, shoe and iron are neck and neck for elimination through the Save Your Token Campaign. The new addition will be a robot, diamond ring, cat, helicopter or guitar.

Fans from more than 120 countries have voted.

The online contest to change the tokens was sparked by chatter on Facebook, where Monopoly has more than 10 million fans.

Monopoly's iconic tokens originated when the niece of game creator Charles Darrow suggested using charms from a charm bracelet for tokens. The real-estate trading game is based on the streets of Atlantic City, N.J., and has sold more than 275 million games worldwide.

The eight tokens are an iron, racecar, Scottie dog, a shoe, thimble, top hat, wheelbarrow and battleship. Most of the pieces were introduced with the first Parker Brothers iteration of the game in 1935, and the Scottie dog and wheelbarrow were added in the early 1950s.

Versions of Monopoly with the new token will come out later this year.

___

Monopoly voting: https://apps.facebook.com/saveyourtoken/

___

Rodrique Ngowi can be reached at www.twitter.com/ngowi

Source: http://news.yahoo.com/monopoly-fans-vote-toss-1-token-add-piece-225316637.html

Colorado Lottery Pa Lottery Ebates lotto Illinois Lottery texas lottery Dell

Saturday, February 2, 2013

Programming cells: Importance of the envelope

Feb. 1, 2013 ? In a project that began with the retinal cells of nocturnal animals and has led to fundamental insights into the organization of genomic DNA, researchers from Ludwig-Maximilians-Universitaet (LMU) in Munich show how the nuclear envelope affects nuclear architecture -- and gene regulation.

The double-stranded DNA molecules that make up the genetic material are wrapped around protein complexes to form compacted "chromatin." The active portion of the genome is less densely packed, and thus more easily accessible, than the inactive fraction, and is referred to as euchromatin. Euchromatin is typically located in the inner regions of the cell nucleus, while much of the inactive DNA in "heterochromatin" is associated with the inner face of the nuclear envelope. This type of chromatin organization is found in almost all higher organisms and may have been invented 500 million years ago.

But there is a curious exception to this generalization. In the retinal cells of nocturnal animals, the heterochromation is localized in the central area of the nucleus, as a research group led by LMU biologists Dr. Irina Solovei and Dr. Boris Joffe showed in a previous study. "This got us interested in the mechanisms that control the distribution of chromatin," says Professor Heinrich Leonhardt of LMU's Biozentrum. "How can the nuclear architecture in the rod cells of nocturnal animals be inverted in this way, and what determines the typical positioning of inactive chromatin on the outskirts of the nucleus in normal cells?" Leonhardt and his team have now completed an extensive study in search of the answers.

A fundamental principle unveiled

With the help of targeted genetic manipulations in the mouse, Joffe and Solovei together with their colleagues show for the first time that there are two independent mechanisms for fixing heterochromatin to the inner face of the nuclear envelope. These mechanisms make use of two different components of the inner nuclear membrane as clamps -- lamin A/C, and the so-called lamin-B receptor (LBR), which itself binds to B type lamins.

Normally the two components are used sequentially for this purpose. "In the course of differentiation, there is a switch from the LBR to lamin A/C, and there is always a least one type of tether available for attachment of heterochromatin to the nuclear periphery. But if both are missing, the inactive heterochromatin recoils like a severed elastic band and collapses in the center of the nucleus," explains Leonhardt. Moreover, the switch seems to be a fundamental principle of genome organization and cell differentiation in mammalian cells, as the researchers concluded from the study of 39 species and the analysis of diverse tissue types in nine genetic strains of mice.

Prospects for targeted therapies Lamin proteins not only have a structural function but also have an impact on gene regulation. Thus LBR binds B type lamins and regulates stem-cell populations by promoting the expression of genes that are important for the proliferation of rapidly dividing stem cells. The lamin A/C gene on the other hand codes for a structural component of the nuclear envelope, and regulates cellular differentiation programs like e.g. the expression of muscle-specific genes in muscle cells. Mutations in this gene result in so-called laminopathies -- rare genetic diseases that are associated with a broad spectrum of clinical symptoms, including muscular dystrophy and progeria, a premature aging syndrome.

Joffe and Solovei suspect that mutations in lamin A/C affect the expression of specific genes during the maturation and differentiation of cells, with deleterious results for their function and for tissue integrity. This notion could explain the highly diverse and complex symptoms seen in patients with mutations in the lamin A/C gene -- and it could open routes to the design of targeted therapies for laminopathies.

The new findings thus yield fundamentally new insights into how each of the many differentiated cell types in the body arises as the result of the precisely regulated expression of a specific complement of genes appropriate to each. "In the end, we have been brought from studies of night vision and an odd quirk of nature to the discovery of a fundamental regulatory mechanism: The nuclear envelope has a major say in development, and what kind of envelope our genetic material comes in makes a great deal of difference to our fate," Leonhardt concludes.

Share this story on Facebook, Twitter, and Google:

Other social bookmarking and sharing tools:


Story Source:

The above story is reprinted from materials provided by Ludwig-Maximilians-Universitaet Muenchen (LMU).

Note: Materials may be edited for content and length. For further information, please contact the source cited above.


Journal Reference:

  1. Irina Solovei, Audrey?S. Wang, Katharina Thanisch, Christine?S. Schmidt, Stefan Krebs, Monika Zwerger, Tatiana?V. Cohen, Didier Devys, Roland Foisner, Leo Peichl, Harald Herrmann, Helmut Blum, Dieter Engelkamp, Colin?L. Stewart, Heinrich Leonhardt, Boris Joffe. LBR and Lamin A/C Sequentially Tether Peripheral Heterochromatin and Inversely Regulate Differentiation. Cell, 2013; 152 (3): 584 DOI: 10.1016/j.cell.2013.01.009

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

Source: http://feeds.sciencedaily.com/~r/sciencedaily/most_popular/~3/38_3gzFCTbw/130201114110.htm

Empire State Building shooting Republican National Convention Karlie Redd guild wars 2 adrian gonzalez Jerry Nelson Foo